Tile Adhesive

A polymer-based, single-component dry powder coarse putty with high bonding strength and excellent workability. It is environmentally friendly and free of pollutants, making it ideal for the first and second coats of putty leveling.

● Good resistance to low temperatures, freezing, and temperature fluctuations, with excellent stability.

● Strong interlayer adhesion and high bonding strength, not prone to detachment.

● Slow drying time, allowing for extended working time and excellent workability.

● High mechanical strength after reacting with putty, with excellent anti-sag performance.

● Easy and convenient to apply, with no need for tile surface roughening.

Climate Requirements: Avoid application in extreme weather conditions such as frost, freezing, rain, or snow. The substrate temperature should be between 5-35°C, and air humidity should be less than 85%.

Mixing Ratio: The tile adhesive should be mixed thoroughly and used directly.

Application Instructions: First, inspect the old wall substrate and treat it according to the method for new walls.
Remove any loose, broken, or cracked tiles, and fill and smooth with exterior wall putty.
If there is floating dust, stains, mildew, or moss, clean the surface with a high-pressure water gun.
After treatment, apply a coat of FAC Tile Bonding Adhesive with a roller before smoothing it with a full coat of coarse putty before it dries.

Storage Instructions: The product is water-based and non-hazardous for transportation. Store in a cool, ventilated place at temperatures between 5-35°C, avoiding exposure to direct sunlight or rain. The sealed storage period is 1 year."